Skip to main content
Installation

What happens during an ESA inspection?

Step by step — what the inspector checks, how long it takes, and what happens if something fails.

The Ontario Electrical Safety Authority (ESA) inspection is the final sign-off on permitted electrical work. Here’s exactly what happens.

Scheduling

Once we’ve finished the install, we file the “ready for inspection” notice with ESA online. An inspector picks up the file and contacts you (or us, if access doesn’t require you to be present) to schedule.

Typical wait time: ESA sets the date after we file. If ESA offers a faster date, any extra ESA fee for it is yours.

On inspection day

An ESA inspector arrives in the time window provided. Most inspections are 15–30 minutes. They show their credentials, you let them in (or unlock the panel access if outdoors), and they get to work.

What they check

The inspector verifies the installation meets the Ontario Electrical Safety Code (OESC), specifically:

  • Grounding and bonding — ground rod, panel ground, bonding to water pipes.

  • Breaker selection — right amperage for the wire size and load.

  • Wire size and routing — correct gauge, protected where it needs protection.

  • Junction boxes and terminations — properly torqued, accessible, covered.

  • Panel work — main breaker, neutral, ground, balanced load.

  • Specific safety details — charger anti-pull-out, generator transfer switch logic, GFCI placement.

  • The label is filled out — circuit directory updated.

What they don’t check

The inspector is verifying our work against the OESC. They’re not auditing your old wiring — just the new addition. Existing issues we didn’t install shouldn’t fail our work, but if ESA requires them fixed, we quote that separately for your approval.

If everything passes

The inspector files a Certificate of Acceptance. ESA emails it to us; we email it to you. It lands in your portal as well. You keep it for warranty / insurance / resale records.

If something fails

The inspector writes a Notice of Defect listing what needs to change. If the defect is in our work, we fix it at no charge (workmanship warranty), including any re-inspection fee. Total time impact: usually 3–5 extra business days.

We test before filing. When something is flagged, it’s usually a small thing (a missing label, a connector that needed a different torque) and the re-inspection is uneventful.

Inspections we don’t coordinate

If you’ve done your own electrical work (not via Copper Bee), you file your own permit and arrange your own inspection. ESA inspects DIY work but only if you have a permit — that’s the legal requirement.

*Still not answered? Start a free quote or email us directly.

Keep reading

Short answers to the questions that come up before a job is booked.

Help Center
(647) 890-4747Get a Free Quote