Skip to main content

Electrician in Richmond Hill.

Richmond Hill is where our crew starts the day. Most houses in town went up between 1981 and 2015 on a 100 A service, and that service is behind most of our calls here: an EV charger, a hot tub or a sauna it can’t carry.1

  • ECRA/ESA #7019043
  • Residential electricians based in Richmond Hill
  • We apply to Alectra for you
Over the electrician’s shoulder: a cordless driver held up to an open disconnect, a black Grizzl-E charger on the wall beside it and its cable coiled on a hook.

Three in four Richmond Hill houses went up between 1981 and 2015.

That’s 76% of the town’s homes, against 44% across Ontario.2 Most of them still run on the 100 A service they were built with, and that’s where most of our panel work in town comes from.1

1981 to 2015: mostly 100 A.

After 2015: mostly 200 A, almost all from about 2018.

1991–2000: 15,915 homes

Mostly 100 A services. When one of these houses adds an EV charger, a hot tub or a sauna, it usually needs load management or a 200 A upgrade.

  • Richmond Hill23%
  • York Region18.5%
  • Ontario11.7%
Occupied private dwellings in Richmond Hill by period of construction, 2021 Census (source 2)
PeriodHomesRichmond HillYork RegionOntario
1960 or before3,4955%5.2%22.7%
1961–19806,97010.1%12.9%26.5%
1981–199012,17517.6%18.1%13%
1991–200015,91523%18.5%11.7%
2001–200510,65515.4%13.5%7%
2006–20107,60011%11.9%6.4%
2011–20156,4059.2%10.1%6%
2016–20216,1008.8%9.8%6.7%
  • Most panels in town are Siemens, Eaton, Square D or Schneider. Some older houses still have a Federal Pioneer Stab-Lok or a Commander QBH, and a fuse panel is rare.1
  • Aluminium branch wiring is uncommon in Richmond Hill, and we have not found knob and tube here.1
  • Most houses are fed underground. Where the service is overhead, a 200 A upgrade means a new mast, conduit and conductors, and sometimes a new meter base.1

Next door: homes in Vaughan are younger still: fewer than one home in thirteen was built before 1981.3

What we do in Richmond Hill, and what it costs.

Prices are our cheapest installed job in each service, from the same catalogue the quote builder uses. Every price is before HST.

  1. EV Charger Installation

    EV charger installation in Richmond Hill is what customers call us for first. The panel usually sits toward the front of the basement, so most installs take 5 to 15 m of cable; a townhouse with its panel in the garage often needs about 3 m.

    from $699 + HST

  2. Electrical Panel Upgrades

    A 100 A service that can’t take an EV charger, a hot tub or a sauna is the usual reason a house here goes to 200 A. We apply to Alectra for you, because the application asks technical questions most owners can’t answer.

    from $1,149 + HST

  3. Load Management Devices

    On a 100 A house it can let the charger in without a new service. On one rental house it saved the owner an upgrade that would have cost over $6,000.

    from $1,649 + HST

  4. Standby Generator Installation

    Whole-home switches outsell essential-circuit panels here, mostly paired with a 22 to 24 kW unit. The gas meter decides a lot: when Enbridge has to upgrade it, add weeks to the plan.

    from $12,199 + HST

  5. Whole-Home Surge Protection

    A whole-home surge protector mounts at the panel, so the cheapest moment to add one is a visit that already has the panel open.

    from $749 + HST

  6. Lighting Installation

    Under an attic, pot lights go in from above. A main-floor ceiling in a two-storey house takes longer, because the cable has to cross the joists. We’d rather cut a small access hole than drill blind past hidden pipes and cables.

    from $179 + HST

  7. Hardwired Smoke & CO Detectors

    A house built before 2014 could be built with alarms in the hall outside the bedrooms rather than one in each. On a renovation we can bring it up to what a new house gets: hardwired, interconnected, with battery backup.

    from $229 + HST

  8. Electrical Property Inspections

    What inspectors and insurers flag most in town: missing GFCI protection in kitchens, bathrooms and outside, double-tapped breakers, oversized breakers, and breakers of another brand that fit the panel but aren’t approved for it.

    from $299 + HST

  9. Emergency Electrician

    Most urgent calls here are a partial or total loss of power, a breaker or main that won’t reset, a burning smell, sparking outlets or a hot panel.

    from $250 + HST

  10. Smart Home Installation

    Smart switches, a thermostat or a video doorbell are small jobs; we can add them to a visit already booked for something bigger.

    from $179 + HST

A 200 amp upgrade with Alectra.

Alectra Utilities is the electric utility for Richmond Hill. It disconnects and reconnects the service when a house is upgraded.4

How long it takes
Alectra quotes 5 to 10 business days for a simple upgrade and about four weeks when an upgrade to 200 A or more needs a service design.5 In busy season the wait for Alectra can run 6 to 8 weeks.1
What Alectra charges
Alectra allows one free planned disconnect every 12 months. Work on its own side, such as a new transformer or a trench, it quotes separately.5
  1. № 01We apply through Alectra’s New Connections portal on your behalf.5
  2. № 02Alectra reviews the application and, when the job needs one, emails a service design with its costs.
  3. № 03You pay Alectra for any work on its side.
  4. № 04We get the house ready: the new panel and whatever the service needs, mast or meter base included.
  5. № 05Alectra finishes any work on its own lines.
  6. № 06ESA inspects our work and sends Alectra a connection authorization.
  7. № 07We book the disconnect and reconnect with Alectra.
  8. № 08On the day, Alectra’s crew restores the power once ESA’s approval is in.

Two storms, and more calls about generators.

  1. May 2022

    The windstorm of 21 May 2022 caused tree damage and power outages throughout Richmond Hill.6

  2. March 2025

    After the March 2025 ice storm, Alectra still had about 18,000 customers without power in Barrie, Penetanguishene and Richmond Hill on 30 March.7

Since those two storms, more Richmond Hill customers ask us about whole-home standby generators.1

Most customers here choose a whole-home transfer switch, usually with a 22 to 24 kW generator for a medium-size house with gas appliances and central air.1

On a Richmond Hill lot the generator usually goes beside the house, where the side yard is wide enough, or in the back. When the gas meter and the electric meter are on opposite sides of the house, the cable and gas runs get longer.1 Generac’s site instructions ask for 3 ft of clearance at the front and ends of a home standby generator and 18 in at the back.8

When the gas meter is too small for the generator, Enbridge takes 2 to 6 weeks on average to upgrade it, and sometimes up to three months.1

Recent jobs, and where they were.

A grey disconnect, a black Grizzl-E charger and its charging cable coiled on a holster, mounted in a row on a bare OSB garage wall.
  1. № 01

    A 50 A circuit for a charger the owner already had

    North York, Toronto · August 2026

    The owner had bought the charger. We ran it a dedicated 50 A circuit from the panel on a new breaker.

  2. № 02

    A Tesla charger across the house from the panel

    East Gwillimbury · September 2026

    A detached house with the garage on the opposite side from the panel, so the cable run was longer than most. The kind of install our extra-metre pricing is for.

  3. № 03

    An EV charger in a townhouse garage

    Innisfil · September 2026

    A townhouse garage, booked for a morning slot at the end of September.

FAQ

Richmond Hill questions.

Still have a question?Browse the Help Center

Alectra quotes 5 to 10 business days for a simple upgrade and about four weeks when the job needs a service design. In busy season we have waited 6 to 8 weeks. On the day, the power comes back once ESA has inspected our work, sent Alectra its connection authorization, and Alectra’s crew is free to reconnect.

Not by law. Ontario required an EV rough-in in new houses from 2018 until it revoked the rule in May 2019, and a 2025 bill to bring it back hasn’t passed. The City’s zoning by-law 93-25 included EV-ready parking too, but the Ontario Land Tribunal deleted that section. Some builders add a rough-in anyway, so ask yours what was included before you buy a charger.

For a detached or semi-detached house, the City usually doesn’t ask for a building permit for the generator or its pad. The ESA permit and inspection and the utility’s approval are always needed, and a licensed gas fitter makes the gas connection.

We haven’t found any here. About 5% of the town’s homes were built in 1960 or earlier, and aluminium branch wiring is uncommon too. The usual problem is capacity: a 100 A service doing more than it was built for.

Only with an overhead service, where the mast, conduit and conductors are replaced and sometimes the meter base too. Most Richmond Hill houses are fed underground, and some already have a 200 A meter base on a 100 A service.

Get started

Your project starts
with a few questions.

If you know what you need

Pick the work and answer a few questions. A licensed electrician prices it and replies — installation and ESA permit included, no separate labour charge.

Get a Free Quote
If you would rather talk it through

Call and speak to an electrician, not a call centre. Nothing is booked and nothing is charged until you have seen the price.

(647) 890-4747
ECRA/ESA licensed contractor #7019043 · Insured · Based in Richmond Hill, covering the Greater Toronto Area
(647) 890-4747Get a Free Quote