Skip to main content

Load Management DevicesRichmond Hill & Toronto

Add load without
upgrading your panel.

* The Black Box reads what your house is drawing in real time. When the panel nears its limit, it holds back the load it manages, your EV charger for one, and lets it run again when there is room.

A 200A panel upgrade starts at $1,999. Often you can keep the panel you have and add what you need to it, safely and to code.

Not sure you need either? Calculate your real load
A grey Black Box energy management unit Copper Bee installed inside a wall, between the studs, hand-labelled "EV charger primary" and "Stove secondary".
Black Box Duo on a 100A service: EV charger and stove
Installed from$1,649 + HST
Installation includes
  • The Black Box
  • Current sensors on your main feed
  • ESA permit

Works withEV chargers · Heat pumps · Hot tubs · Saunas · Pool heaters (compatible loads up to 50 A)

Our devices

Choose your Black Box.

Prices run from $1,649 to $2,549, plus HST. Every price below includes the device, its installation next to your panel and the ESA permit.

You are adding one big load

One device runs through the Black Box, an EV charger most often. Pick the row that matches your service size, the number on your main breaker.

Black Box EVEMS240-100 Load Manager
№01Black Box60–100A service

EVEMS240-100 Load Manager

Smart load management for 60–100A services — manages one energy-intensive device.

60–100A service supportManages 1 device (EV chargers up to 48A)Often avoids a service upgrade
$1,649installed + HST
More info
Black Box EVEMS240-200 Load Manager
№02Black Box125–200A service

EVEMS240-200 Load Manager

Smart load management for 125–200A services — manages one energy-intensive device.

125–200A service supportManages 1 device (EV chargers up to 48A)Works with your existing panel
$1,699installed + HST
More info
You are adding two

The Duo manages two loads from one unit and gives the first one priority. Pick the row that matches your service size.

Black Box EVEMS240-100-DUO Load Manager
№03Black Box60–100A service

EVEMS240-100-DUO Load Manager

Dual-device load management for 60–100A services — manage two high-draw devices.

60–100A service supportManages 2 devices (EV chargers up to 48A)Often avoids a service upgrade
$2,499installed + HST
More info
Black Box EVEMS240-200-DUO Load Manager
№04Black Box125–200A service

EVEMS240-200-DUO Load Manager

Dual-device load management for 125–200A services.

125–200A service supportManages 2 devices (EV chargers up to 48A)Works with your existing panel
$2,549installed + HST
More info
Get a Free Quote
№03 · The Comparison

Load Management — side by side.

Load managers let you add high-draw devices without upgrading your service. Match the amperage to your existing panel.

№01Black Box

Black Box EVEMS240-100 Load Manager

★$1,649installed + HST
№02Black Box

Black Box EVEMS240-200 Load Manager

$1,699installed + HST
№03Black Box

Black Box EVEMS240-100-DUO Load Manager

$2,499installed + HST
№04Black Box

Black Box EVEMS240-200-DUO Load Manager

$2,549installed + HST
Service size
60-100A
125-200A
60-100A
125-200A
Managed devices
1
1
2
2
Max device amperage
48A
48A
48A
48A
Warranty
1 year
1 year
1 year
1 year
How it goes

From quote to installed.

  1. We check your panel

    Request a quote and send a photo of your panel. A licensed electrician confirms your service size and which Black Box fits what you are adding.

  2. ESA permit filed

    We file the ESA permit for the work. It is included in the price.

  3. Installed next to your panel

    The unit mounts beside your main panel, with its current sensors on the main feed. The price assumes the wiring to the load is already there.

  4. Set to your service, then tested

    We set the unit to your service size, label what it controls and test it before we leave.

An electrical panel with every breaker space filled, two columns of black breakers with the circuits hand-labelled beside them: kitchen counter plugs, microwave, fridge, washer, furnace.
A full panel, every circuit labelled
5 out of 5 stars

“The quoted price was transparent and without any surprises at the end of the job.”

Eric TranEV charger install,
Read it on Google(opens Google Maps)

The review in full

I used Copper Bee to install an EV charger in my home, and I was very impressed with the service that they provided.

The team was punctual and efficient. They were able to quickly install the charger with a strong attention to detail and safety. The quoted price was transparent and without any surprises at the end of the job. They handled everything from start to finish including the permit and coordinating ESA certification. I highly recommend them if you're in the market for electrical work.

How it works

Your panel stays as it is.

Starts at $1,649 + HST vs a panel upgrade

A 200A panel upgrade starts at $1,999 + HST. The Black Box gets the new load onto the service you already have, without replacing the panel. Which one is cheaper for your home depends on your panel, and we tell you before you commit.

What you give up

At peak, the managed load waits. With the oven on and the heat running, your car may charge slower or pause, then pick up again when the house quiets down. If you charge overnight you will rarely see it.

It reads the whole house

Current sensors on your main feed tell the Black Box what the house is drawing, and it compares that with your service size.

Two loads from one unit

The Duo manages two circuits and gives the first one priority. An EV charger and a stove, on one of our installs.

For a service at its limit

When the load calculation says your service has no room for another big device, a load manager is how it goes in without a new service.

Rental properties

Adding EV charging to a rental? It goes in next to the panel, without replacing it.

Comparison

Load manager vs panel upgrade.

Both get the new load onto your service. One keeps your panel, the other replaces it.

See the difference
Cost, installed
Panel upgrade$1,999–$5,149
Load manager$1,649–$2,549
Your panel
Panel upgradeReplaced
Load managerStays
Everything at full power at once
Panel upgradeYes, up to the new service size
Load managerNo, the managed load waits at peak
Power off during the work
Panel upgradeA few hours to most of a day
Load managerBriefly
ESA permit
Panel upgradeIncluded
Load managerIncluded

Room for one or two big loads is a load manager’s job. A panel that needs replacing anyway is a panel upgrade. We tell you which from your photos.

Get a Free Quote
FAQ

Load management questions.

Still have a question?Browse the Help Center

It is a smart switch that monitors how much current your panel is drawing in real time and throttles your EV charger when other heavy appliances (dryer, A/C, stove) are running. Result: you add an EV charger without exceeding your panel capacity — no upgrade needed.

Usually load management, but not always. Load managers run $1,649 to $2,549 installed, plus HST; a 200A upgrade starts at $1,999 plus HST. Which is cheaper depends on your panel and what else is on it. The trade-off with load management: your EV may charge slower while the dryer runs — invisible if you charge overnight. We do the math on your setup and tell you which one we would pick.

Yes — devices like Black Box EVEMS work with every Level 2 charger because they sit between the panel and the charger circuit. They are charger-brand-agnostic.

Yes. The duo variants of devices like Black Box EVEMS manage two chargers from one unit, each on its own circuit. When the house has room, both charge. At peak the unit holds charging back, so two cars take longer than one.

For overnight charging, yes — even at a reduced rate during peak household demand, you will wake up to a full battery on every common EV. Load management is designed for residential use patterns where the car sits in the garage for 8+ hours.

Yes — like any hardwired EV charger install, the load-management device and the charger circuit need an ESA permit. We handle the permit and inspection as part of our quoted price.

Get started

Your project starts
with a few questions.

If you know what you need

Pick the work and answer a few questions. A licensed electrician prices it and replies — installation and ESA permit included, no separate labour charge.

Get a Free Quote
If you would rather talk it through

Call and speak to an electrician, not a call centre. Nothing is booked and nothing is charged until you have seen the price.

(647) 890-4747
ECRA/ESA licensed contractor #7019043 · Insured · Richmond Hill, Newmarket, Aurora, Vaughan, Markham and Toronto · Service area

Helpful articles

Short answers to the questions that come up before a job is booked.

Help Center
(647) 890-4747Get a Free Quote